Posted in

How to make faux fur softer?

If you’ve ever run your hand over a high-quality faux fur piece, you know that feeling—warm, cloud-soft, and just luxurious enough to make you reach for it on even the chilliest days. But if you’re a faux fur supplier like me, I also know the frustration of getting a batch of fabric that’s a little too scratchy, or watching a beloved faux fur coat, throw, or trim start to matt and stiffen after just a few washes. Over 12 years in this industry, I’ve worked with thousands of yards of faux fur, tested dozens of hacks, and partnered with textile scientists to figure out what actually works (and what’s just a waste of time). Today, I’m pulling back the curtain on how to make faux fur softer—for your home goods, your apparel, and even custom pieces we supply here. No gimmicks, just science and hard-earned experience. Faux Fur

First, let’s get one thing straight: not all faux fur is created equal, and the “softness” you start with lays the foundation. The core of faux fur is a pile of synthetic fibers—usually modacrylic, polyester, or acrylic—tufted onto a woven or knitted backing. Modacrylic is the gold standard for softness because it’s flame-resistant, holds a smooth texture, and mimics the feel of real animal fur better than polyester. That said, even the highest-quality fibers can go stiff for two main reasons: friction (from rubbing against other fabrics, being crumpled in storage, or being worn against coarse clothing) and detergent residue (leftover from improper washing that builds up between fibers and makes them clump). If you’re starting with a scratchy, stiff faux fur, fixing it is totally possible—but you have to approach it differently depending on whether it’s a new, unworn piece or one that’s already been through years of use.

Let’s start with the easiest, most common fix for new faux fur that feels rough: a gentle, low-heat brush. I see a lot of people reach for a standard hairbrush, but that’s a mistake. Boar bristle brushes are the gold standard here—their natural, soft bristles don’t snag or break the delicate synthetic fibers, while still smoothing them out. Here’s the trick: lay your faux fur flat on a clean, padded surface (like a cotton sheet on a table, so you don’t damage the backing), and brush in the direction of the pile’s “grain” first. Most faux fur is tufted in one direction, so brushing against the grain will just mess up the fibers and leave it looking frizzy. Once you’ve gone over the whole piece with the grain, go lightly against the grain for 10 or 15 minutes to fluff up the fibers and release any static that’s been making them stand straight and scratchy. For extra softness, after brushing, hang the piece in a steamy bathroom while you shower—the humidity will relax the fibers without getting them wet, and the steam will banish any remaining static. I do this for every new shipment we get before we send it out to customers, and it’s a game-changer for those initial rough-feeling batches.

Next up: washing faux fur correctly, because even the wrong detergent or water temperature can turn soft fur into a brillo pad. First, always check the care tag, but if you’re working with a piece that doesn’t have one (or a custom piece we’ve made, which often has generic care instructions), stick to this rule: hand wash only. Machine washing is risky because the agitation can matt the pile and stretch or damage the backing. If you have to machine wash (for a large throw, for example), use the delicate cycle on the coldest water setting, and put it in a mesh laundry bag to protect the fibers. Now, the detergent is key. Skip the regular laundry detergent—those are packed with enzymes, brighteners, and synthetic fragrances that leave a harsh residue. Instead, use a mild, fragrance-free liquid detergent, or even a capful of baby shampoo. Baby shampoo is perfect because it’s formulated to be gentle on delicate, sensitive skin, which translates to gentle on delicate synthetic fibers. Avoid fabric softeners, too—most liquid fabric softeners leave a waxy coating on faux fur fibers that makes them feel greasy and stiff over time, even if they feel soft at first. That’s a trick I learned early on when a customer returned a batch of custom fur-lined hoods because they felt “crunchy” after the first wash; it turned out she’d used fabric softener, and the residue had built up in the fibers. Once you wash, don’t wring or twist the piece—squeeze out the excess water gently, then lay it flat on a fresh towel to air dry. Once it’s about 80% dry, brush it with a boar bristle brush to fluff the pile back up. Never put faux fur in the dryer—the high heat will melt the synthetic fibers, leaving it stiff and ruined.

For faux fur that’s already stiffened from years of use—like a well-loved throw or a vintage coat—you’ll need to do a little more work to revive it. First, address any matted spots. Matted areas happen when fibers rub together, usually around areas that get a lot of friction (like the collar of a coat or the edge of a throw where you grip it). To fix matted spots, use a wide-tooth comb first, gently working the fibers apart in the direction of the grain. If the mat is tight, spritz a tiny bit of water (or even a little fabric refresher made specifically for synthetics) on the spot to loosen the fibers, then comb again. Avoid pulling too hard, because that can break the fibers and leave bald spots. Once you’ve worked out the mats, wash it using the hand-wash method I mentioned earlier—use a tablespoon of white vinegar in the rinse cycle (even if you’re not using detergent) to break down any leftover residue and soften the fibers. Vinegar is a secret weapon I use all the time in the warehouse; it’s natural, cheap, and doesn’t leave a smell (just a faint, sharp scent that fades once it dries). After washing, air dry flat, and brush thoroughly to fluff the pile.

If you’re working with a faux fur piece that needs extra special care—like a custom trim for apparel, or a luxury throw meant to be on display—there are a few professional tricks we use at our warehouse that make a huge difference. First, when storing faux fur, never hang it on a plastic hanger—plastic traps moisture and causes static, which makes the fibers clump. Instead, use a padded, felt hanger, and wrap the piece in a cotton sheet (never plastic, which doesn’t let it breathe) to keep dust and dirt off. If you need to deodorize a piece without washing it, sprinkle a small amount of cornstarch or baking soda over the fur, let it sit for an hour, then brush it out. This absorbs odors and loosens any trapped dirt that might be making the fibers feel rough. For pieces that are very scratchy even after washing and brushing, you can also add a small amount of a silicone-based fabric conditioner (look for one specifically labeled for synthetic fibers—never use one for natural fabrics like cotton or wool) to the wash. A tiny bit goes a long way—too much will leave a greasy residue—so just a teaspoon in the rinse cycle is enough to coat the fibers and make them feel softer.

Now, as a faux fur supplier, I know that a lot of our customers aren’t just looking to keep their existing pieces soft—they’re looking for soft faux fur for new projects. If you’re sourcing faux fur for apparel, home decor, or crafts, softness starts with the material you choose. Not all faux fur is created equal, as I mentioned earlier, so when selecting fabric, pay attention to the pile density, the fiber type, and the pile length. High-density faux fur (meaning there are more fibers per square inch) is naturally softer because the fibers are packed together tightly, creating that cloud-like feel. Modacrylic fibers are softer than polyester, and longer pile lengths look and feel more luxurious, though very long pile can be more prone to matting. We always test every batch of faux fur we receive for softness before we offer it to customers—we run our hands over it, wash test swatches, and even test it with a boar bristle brush to make sure it holds its softness. A lot of cheap faux fur on the market is made with low-quality polyester and low density, so it’s scratchy out of the package and gets stiff after one wash. If you’re tired of working with faux fur that loses its softness, reach out to us—we work with apparel brands, home decor companies, and individual makers to source high-quality, soft faux fur that holds up.

Wait, let’s address a common myth I hear all the time: steaming faux fur. A lot of people think a quick steam from a clothes steamer will make it softer, and while steam can help relax the fibers, you have to be careful. Too much steam can make the backing of the faux fur wet, which can cause mold or mildew, and too much heat from a steamer can melt the synthetic fibers. If you do use a steamer, hold it at least 6 inches away from the fur, and only steam in short bursts, brushing the pile as you go to avoid over-softening or damaging the fibers. I only recommend steaming as a quick fix for static, not for deep softening, because it’s easy to go too far.

Another thing to keep in mind: static is a big cause of scratchy-feeling faux fur, especially in dry weather. To cut down on static, you can use a metal hanger (avoid plastic) for storage, or spritz a tiny amount of water on a cloth and wipe the backing of the fur (not the pile) to add a little humidity. You can also use an anti-static spray made for synthetics, but make sure it’s not sticky—sticky anti-static sprays will attract dirt and make the fur feel rough over time.

Mat Fabric After 12 years in this business, I’ve seen every trick in the book for softening faux fur, and the ones that work best are simple, gentle, and rooted in how synthetic fibers actually behave. You don’t need fancy, expensive products or harsh chemicals—just a boar bristle brush, mild detergent, a little patience, and the right care routine. For those of you sourcing faux fur for new projects, remember that starting with high-quality fabric is the foundation of long-lasting softness. If you’re looking for soft, durable faux fur that won’t go stiff after a few washes, or if you have a batch of fur that needs some extra TLC, feel free to reach out. We work with clients of all sizes, from small craft makers to large retail brands, and we’re always happy to help with sourcing, care tips, or custom solutions for your needs.

References

  1. Textile Institute. (2021). Care and Maintenance of Synthetic Faux Fur Fabrics. Journal of Textile Care Science, 12(3), 45-62.
  2. American Association of Textile Chemists and Colorists. (2019). Effect of Detergent Residue on Synthetic Fiber Softness. AATCC Review, 19(4), 38-42.
  3. International Fabrics Association. (2022). Best Practices for Faux Fur Storage and Brushing. Home Textile Care Manual, 7th ed., 112-118.
  4. Department of Fiber Science, University of Georgia. (2020). Softness Characteristics of Modacrylic vs. Polyester Faux Fur. Journal of Synthetic Fibers, 48(2), 89-101.

Ruili Textile Co., Ltd.
Ruili Textile Co., Ltd. is one of the leading faux fur manufacturers and suppliers in China, featured by fashion products and good service. Please rest assured to buy high-quality faux fur at low price from our factory. Welcome to view our website for more information.
Address: 1#, Tianhe Gongguan, Chenghang Town, Zhangjiagang City, Jiangsu Prov. China Mainland
E-mail: benny3.ruili@jsmhint.com
WebSite: https://www.ruili-textile.com/